Leak Test Apparatus
Product Code : EL-GLE-10304
Quick Answer: The Leak Test Apparatus is used to check packed strips, blisters, small sachets and ampoules for leakage under vacuum. It has a programmable vacuum level and hold time and an oil-less vacuum pump.
Last updated: October 2026
Key Features
- Checks leakage of packed strips, blisters, small sachets and ampoules
- Programmable vacuum level and hold time
- Slow venting
- Oil-less vacuum pump
- Timer from 1 min up to 99 minutes
Technical Specifications
| Specification | Value |
|---|---|
| Vacuum level | Better than 600 mm of Hg |
| Timer | 1 min to 99 minutes |
| Vacuum setting | Stabilises to the set value +5 mm of Hg within 30 s |
| Pump | Oil-less vacuum pump |
| Power requirement | 230 V, 50 Hz |
About This Product
It is used to check sealed pharmaceutical packs: the packs are held under vacuum for a set time and then vented slowly, so that a faulty seal can be found. The vacuum level and hold time are programmable. The tablet tester, powder flow tester and tap density tester in the same listing test the product itself rather than its pack.
Frequently Asked Questions
Q1. What can the Leak Test Apparatus check?
Leakage of packed strips, blisters, small sachets and ampoules.
Q2. What vacuum level does it reach?
Better than 600 mm of Hg. The vacuum stabilises to the set value +5 mm of Hg within 30 seconds.
Q3. What timer range does it have?
From 1 minute up to 99 minutes.
Related: General laboratory equipment, 2 Parameter Tablet Tester with Printer, Powder Flow Tester and Tap Density Tester.
For a quotation on the Leak Test Apparatus, contact Laboratory Glassware Ambala.