Tap Density Tester
Product Code : EL-GLE-10306
Quick Answer: The Tap Density Tester is a single-station tester with simultaneous rotating and tapping motion, set to 300 or 250 taps per minute. It calculates and prints tapped density, compressibility index and Hausner ratio.
Last updated: October 2026
Key Features
- Tapping rates of 300 and 250 taps per minute
- Simultaneous rotating and tapping motion for an evenly packed surface
- Calculates and prints tapped density, compressibility index and Hausner ratio
- Online validation of strokes per minute
- 24 x 2 character LCD
- Takes 10 ml, 100 ml and 250 ml cylinders
Technical Specifications
| Specification | Value |
|---|---|
| No. of stations | 1 |
| Strokes per minute | 300 or 250 |
| Stroke height | 14 mm ± 2 mm (300 strokes/min); 3 mm ± 0.3 mm (250 strokes/min) |
| No. of taps | 1 to 9999 |
| Display | 24 x 2 character LCD |
| Motor | 6 V DC, 10 kg cm stepper motor |
| Printer port | Parallel |
| Power supply | 220/230 V AC, 50/60 Hz, 44 VA |
| Cylinders accepted | 10 ml, 100 ml, 250 ml |
About This Product
It is used to measure the tapped density of powders and granules by tapping a cylinder of sample a set number of times. The Powder Flow Tester is listed separately for flow measurement.
Frequently Asked Questions
Q1. Which tapping rates does the Tap Density Tester offer?
300 taps per minute with a stroke height of 14 mm ± 2 mm, and 250 taps per minute with a stroke height of 3 mm ± 0.3 mm.
Q2. Which cylinder sizes does it accept?
10 ml, 100 ml and 250 ml cylinders.
Q3. What results does it calculate?
It calculates and prints tapped density, compressibility index and Hausner ratio. The tap count can be set from 1 to 9999.
Related: General laboratory equipment, Powder Flow Tester and 2 Parameter Tablet Tester with Printer.
For a quotation on the Tap Density Tester, contact Laboratory Glassware Ambala.